• page_banner_01
  • page_banner-2

You can judge whether the machine is faulty by the running state

Sometimes when we buy machinery and equipment, we want to know if it is of good quality and has no faults. Then we can see from many aspects whether the automatic labeling machine is malfunctioning during the use. In fact, it is also very Simple, mainly from the perspective of running status, how to look specifically, let’s analyze it below;

 Machine size

  1. Judging from the stability of the label: adjust the automatic labeling machine to the set high speed, count the position of the brake electric eye on the label, and then trigger the labeling electric eye quickly and continuously, remember to observe whether the label runs linearly, and stop After triggering, observe the position of the brake electric eye on the label and count the number of labels. A good labeling machine will never produce more labels than the number of triggers. Of course, if you trigger the labeling again before the label is finished , There may be fewer labels.

2. Look: the appearance of the fully automatic labeling machine can reflect the designer’s concept of the machine. The appearance of the labeling machine we often say does not only refer to the aesthetics, but also includes the rationality of the equipment design, such as the difficulty of changing labels. It is easy to adjust the position without using tools, whether the man-machine interface is easy to understand and operate, etc. Therefore, whether a labeling machine is only designed to complete the packaging task, or considering the human side, you will know by looking at the appearance.

3. Listen: The characteristics of the automatic labeling machine determine that the labeling motor needs to start and stop continuously. If the start and stop sound of the equipment motor is found to be urgent during use, then the automatic labeling machine has insufficient procedures or Motor selection problem. During the installation process of the labeling machine, if the parts are not installed correctly in this part, or there is a certain deviation, then various problems will be caused during the operation of the automatic labeling machine.

https://www.ublpacking.com/flat-labeling-machine-product/ 

        The introduction about judging whether the machine is faulty by the running state is here. For details, please consult this site: https://www.ublpacking.com/


Post time: Jan-17-2022
ref:_00D361GSOX._5003x2BeycI:ref